ENGLISH
简体中文
Working performance of components and parts of scrap iron briquetting machine at different operation stages
Reads: 516
Times: 2022-06-11
The protection of the scrap iron briquetting machine should be targeted according to different operation stages, which means that the scrap iron briquetting machine should have different protection priorities in different operation stages.
The maintenance of scrap iron briquetting machine shall be focused on according to different operation stages, that is, different operation stages of scrap iron briquetting machine protection shall be different focuses. For example, the focus of early and late protection of scrap iron briquettes and equipment is different, and the first-aid measures adopted to deal with sudden problems are also different from the usual ones.
1. At the initial stage of operation of the scrap iron briquetting machine, due to vibration, it is easy to cause the broken pipe joint to loosen, the sealing quality is poor or the installation is improper; Under the influence of oil flow, damping hole and oil filter, the burrs, formed sand chips and other dirt in the oil grooves of pipes or hydraulic components fall, resulting in unstable pressure and speed. Leakage caused by high oil temperature caused by large external environmental load or poor heat dissipation conditions will lead to uneven changes in pressure and speed.
2. The hydraulic equipment failure rate of the scrap iron briquetting machine is relatively low in the middle and later stages of operation, and the system operates well, but special attention should be paid to avoid oil contamination. Especially in the later stage, due to the different operating frequency and load, the vulnerable parts begin to show normal abnormal wear. At this stage, the fault rate is high, leakage is added, and the power of the briquetting equipment will decrease.
3. The characteristics of sudden problems are sudden and without symptoms, such as collision, pipe rupture, foreign matter blocking the channel, seal damage, etc. Although these problems are caused by occasional factors, they are closely related to the operation quality. These conditions may cause sudden problems in the hydraulic system at each operation stage.
Therefore, in order to avoid the occurrence of the above adverse conditions, the maintenance of hydraulic equipment must run through the whole life cycle of the equipment, strengthen management from time to time, do not let go of any abnormal phenomena, and make technical treatment and detailed records. Pay special attention to the oil change of new equipment. The whole hydraulic system must be cleaned with cleaning oil, and the filter screen and other components of the hydraulic system will be cleaned regularly in the future. In a word, the operator should know the equipment status in time and solve the problems in time.
The maintenance of scrap iron briquetting machine shall be focused on according to different operation stages, that is, different operation stages of scrap iron briquetting machine protection shall be different focuses. For example, the focus of early and late protection of scrap iron briquettes and equipment is different, and the first-aid measures adopted to deal with sudden problems are also different from the usual ones.
1. At the initial stage of operation of the scrap iron briquetting machine, due to vibration, it is easy to cause the broken pipe joint to loosen, the sealing quality is poor or the installation is improper; Under the influence of oil flow, damping hole and oil filter, the burrs, formed sand chips and other dirt in the oil grooves of pipes or hydraulic components fall, resulting in unstable pressure and speed. Leakage caused by high oil temperature caused by large external environmental load or poor heat dissipation conditions will lead to uneven changes in pressure and speed.
2. The hydraulic equipment failure rate of the scrap iron briquetting machine is relatively low in the middle and later stages of operation, and the system operates well, but special attention should be paid to avoid oil contamination. Especially in the later stage, due to the different operating frequency and load, the vulnerable parts begin to show normal abnormal wear. At this stage, the fault rate is high, leakage is added, and the power of the briquetting equipment will decrease.
3. The characteristics of sudden problems are sudden and without symptoms, such as collision, pipe rupture, foreign matter blocking the channel, seal damage, etc. Although these problems are caused by occasional factors, they are closely related to the operation quality. These conditions may cause sudden problems in the hydraulic system at each operation stage.
Therefore, in order to avoid the occurrence of the above adverse conditions, the maintenance of hydraulic equipment must run through the whole life cycle of the equipment, strengthen management from time to time, do not let go of any abnormal phenomena, and make technical treatment and detailed records. Pay special attention to the oil change of new equipment. The whole hydraulic system must be cleaned with cleaning oil, and the filter screen and other components of the hydraulic system will be cleaned regularly in the future. In a word, the operator should know the equipment status in time and solve the problems in time.
